High bright Bridgelux solar led street light 12W
|Solar panel||high-efficient monocrystalline silicon 18W|
|Human body sensing||Yes|
|Charging by sun||6-7 hours|
|Full power ≥ 30hr|
|Saving mode ≥ 40hr|
|Material||High quality die-casting aluminum alloy|
|Light degradation rate||25000h ≤ 30%|
|Application||garden, courtyard, road, outdoor, etc.|
Our all-in-one solar parking lot lights are a breathe to install. You just need to fasten the included 4 bolts to mount the unit on the pole. Everything is combined in ONE slim and compact unit:
- LED engine
- Lithium battery
- Charge controller
- Solar panel
- Infrared motion detector
Once the unit is in place, the very efficient solar panel will start gathering energy from the sun to charge the built-in high-capacity Lithium battery for night use.
Solar LED street Lights are perfect to lighten a parking lot, private street, driveway or any open area. These solar lights are smarter than any typical parking lot light. They feature a human infrared technology (infrared motion detector) that can detect the presence of a person and automatically adjust the brightness of the LEDs. This feature is great to help ensure there is enough power saved up for the entire night and overcast days
Solar LED street Lights are very essential for people's safety and are of great help for safely park and localize cars at night-time. Jetties, pontoons and boat ramps can also benefit from these compact and affordable LED solar street lights.
A day of sunlight is sufficient to recharge the built-in Lithium battery which provides the necessary juice to power the solar led street light through the night. In addition, the unit is equipped with a photocell to detect the time of day, whether dusk or dawn, and turn the unit on or off depending on whether lighting is needed.
3. Installation Directions
1.To place the light pole into the best spot with good day lighting . The light pole should be the length 3-5m, the thickness 2.0mm with material iron or steel, the diameter 40-100mm.
2.Please check if the components are all here when open the packing, the components are show below.
3.Please turn on the switch before using.
4.Place the lamp on the pole by its sleeve,and make sure it is steady,then it is OK.